| Model | IF1375-10 | IFM8055 | IFM8075 | IFM8075S* | IFM1011 | IFM1015 | IF8055 |
|---|---|---|---|---|---|---|---|
| W × D × H | 646×480×1,082 (mm) | 534×691×1,095 (mm) | 585×425×375(mm) | ||||
| Weight | 163 kg | 150kg | 163kg | 128kg | 136kg | 140kg | 79 kg |
| Pressure | 70~100 kg/cm² | ||||||
| Discharge Rate | 36 ℓ/min | 30 ℓ/min | 36 ℓ/min | 36 ℓ/min | 60 ℓ/min | 66 ℓ/min | 30 ℓ/min |
| Power | 7.5 kW | 5.5 kW | 7.5 kW | 7.5 kW | 11 kW | 15 kW | 5.5 kW |
| Pest Control Area | 10,000 m² | 6,000 m² | 10,000 m² | 10,000 m² | 10,000 m² | 10,000 m² | 6,000 m² |
Amazement in 15 Seconds
Another-level high pressure pump of 100kg/cm² creates fine particles in average size of 20 μm, which fills in the greenhouse in only 15 seconds.
That cloud fills every cubed inch of the greenhouse. The incredible discharge rate of 30 liters per minute starting immediately upon operation
is most surprising for all of our customers, and by not using chemicals at high concentrations and using the prescribed dilution rate and amount,
or by using a low quantity of chemicals, the chemical resistance of the plants does not increase and costs are reduced.

Before Spray

After Spray
More Plentiful, More Powerful
The size of the particles dispersed by the Innofarm unmanned automatic control device is so fine that they float in the air.
Automatic Micro Sprayer’s fine particles in average size of 20 μm float among the air, covering the back and the inside of the plant leaves.

Fast & Stable Humidity Control
Automatic Micro Sprayer’s abundant discharge and fine particles increase the humidity inside the greenhouse within a short time.
This is because the large volume of discharge and the fine particles evaporate in a short time.
Stable humidity control is essential for growing crops.
The difference in production after using Innofarm’s unmanned automatic control device will prove this.

Operation in the Way You Want
You can set up to 15 zones, and you can disable unwanted movements.
The device can operate automatically according to the set humidity, and it can repeat spraying at intervals.
Unlike its functional diversity, the operation is intuitive and straightforward. With just a few touches, you can create the environment you want.
New Method of Approach
Innofarm's nozzle developed in-house is a new type of nozzle that has never been seen before.
Over 100kg of high-pressure water is sprayed 360° by hitting the pin and it is immediately converted into fine particles in the form of water vapor.
There is no need to worry about clogging of the nozzle. It is possible to prevent clogging as there is no nozzle self-filtering net or swirling plate,
which are the main causes of the blockage, and the water has already been filtered twice.

Fast & Effective Cooling
A single Innofarm unmanned automatic control device covers up to approximately 10,000 square meters. There are three models,
which are 5 zones, 10 zones, and 15 zones, and it’s possible to create the desired environment suitable for the size of the farm.
With more than 0.5L of water per minute coming from each nozzle, it’s possible to control over 660 square meters with just 25 nozzles.
A large area can be covered with just a single unit, and the installation is very straightforward.
